Rollers & Studs

This large trunk roller is perfect for a larger trunk.  The stell design of this roller means it will stand up to a lot of use and keep going.  This roller is meant to be mortised into the trunk so that only the plate and a little of the wheel show.

• Mounting Plate: 2" Long x 1" Wide
• Roller: 3/4"diameter x 13/16"wide
• Each roller will support 20 pounds.
• Steel

Packages contains one trunk roller. Item ships same or next business day.

This trunk roller is a high quality roller and perfect for a  trunk or small chest.  The roller attaches to the side and the bottom of the box it is applied to and makes moving a filled chest easier.

• Overall Size: 3 3/16" High x 7/8" Wide x 1 1/2" Deep
• Up Leg: 2 1/2"
• Under Leg: 1 3/16"
• Cast Brass

Packages contains one roller. Item ships same or next business day.

This domed trunk bottom stud is perfect for raising your trunk up off the floor or to be used as a glide.  The stud will raise your trunk up aproximately a half an inch.

• 7/8" Diameter
• 5/8" Pin
• Still with Brass Plate

Packages contains one stud. Item ships same or next business day.

This trunk bottom stud will raise your trunk off the floor aproximately 3/8 of an inch or can be used as a glide for your trunk. 

• Overall Size: 1 1/2" Wide x 2" Long
• Steel with Brass Plate

 Packages contains one stud. Item ships same or next business day.

This small trunk roller is perfect for a smaller trunk or chest.  The stell design of this roller means it will stand up to a lot of use and keep going.  This roller is meant to be mortised into the trunk so that only the plate and a little of the wheel show.

• Mounting Plate: 1 13/16" Long x 5/8" Wide
• Roller: 5/8" Diameter x 7/16" Wide
• Each roller will support 20 pounds.
• Steel

Packages contains one trunk roller. Item ships same or next business day.

This trunk bottom stud will raise your trunk off the floor aproximately 3/8 of an inch or can be used as a glide for your trunk. 

• Overall Size: 1 1/2" Wide x 2" Long
• Steel with Brass Plate

 Packages contains one stud. Item ships same or next business day.

This trunk roller is perfect for trunks or chests.  The steel design of this roller means it will stand up to a lot of use and keep going.  This roller is can be mounted right onto the surface of the bottom of the trunk so you do not have to mortise.  This has been reproduced from original rollers off of antique trunks.

• Mounting Plate: 2" Long x 3/4" Wide
• Height: 3/4"
• Roller: 9/16" Diameter x 1/2" Wide
• Will raise trunk 3/4" 
• Overall Length 
• Steel with Cast Iron Finish

Packages contains one trunk roller and mountin screws. Item ships same or next business day.